Amprobe AT-6010/KIT Advanced Wire Tracer Kit, with AM-530 Multimeter

Description

Subscribe to Our Newsletter
Amprobe AT-6010/KIT Advanced Wire Tracer Kit, 600 V AC/DC with AM-530 True-RMS Auto/Manual Ranging Electrical Contractor Multimeter
Brand:
Amprobe
Model No:
AT-6010/KIT
Ref No:
5103770
Our Model No:
AT6010KIT
Product Overview
Features
Receiver/Tracer operating voltage: 0 to 600 V AC/DC
Receiver/Tracer operating frequency: Energized 6.25 kHz/De-Energized 32.768 kHz
Receiver/Tracer measurement category: CAT III 600 V
Tracer hazardous voltage detection: > 30 V AC/DC
Tracer current output of signal (typical):
Energized circuit: HI mode: 60 mA RMS
De-energized circuit: HI mode: 130 mA RMS
Loop mode: 160 mA RMS
Tracer signal voltage output (nominal):
De-energized circuit: HIGH: 33V RMS, 140 Vp-p
Receiver range detection (open air):
Tip sensor (Energized):
Max distance via air: up to 20 ft (6.1 m)
Pinpointing: approx. 1.97 in (5 cm)
Tip sensor (De-energized):
Max distance via air: up to 14.7 ft (4.5 m)
Pinpointing: approx. 1.97 in (5 cm)
Receiver display size: LCD 2.5 in (6.35 cm)
Power: 1.5 V AA Batteries
Finds shorts and opens
Transmitter "Loop" mode for closed loop de-energized circuits
Two frequency modes for optimal tracing in energized and de-energized circuits
Large LCD Receiver screen with two digit readout, bar graph and sound to easily determine wire location
Simple one button Transmitter operation
Compatible with the CT-400 Signal Clamp accessory (not included) for inducing tracing signal on cable when there is no access to bare conductors
Applications
Trace energized and de-energized wires
Identify breakers and fuses
Connect to GFCI protected circuits
Find breaks and opens
Find shorts
Trace wires in metal conduit
Trace non-metallic pipes and conduit
Trace shielded wires
Trace underground wires
Trace low voltage wires and data cables
Sort bundled wires
Map a circuit with test leads
Trace breakers on system with light dimmers
AM-530 Features:
Voltage up to 600V AC and 600V DC, AC/DC
Current, resistance, Frequency, Capacitance, and Temperature
True-rms
VolTect™ Non-contact voltage detection
Audible continuity
Diode test
Data hold
Max/min memory
Relative zero mode
Built-in test leads storage and "third hand"
test lead holder
Auto and manual ranging
Auto power off
Low battery warning
Safety rated: CAT III 600V
Description
Wire tracing made simple
With the AT-6010/KIT Advanced Wire Tracer Kit, it's never been easier and safer to locate Energized and De-energized wires, breakers and fuses. When the Transmitter is connected to the circuit, the Receiver easily detects the signal in the wires or cables behind walls, ceilings and floors. The Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments, allowing for work directly on an energized circuit without the need to take equipment offline. The Transmitter also features high signal mode for general tracing and a loop mode designed specifically for locating shorts, as well as two optimal tracing frequencies that are automatically activated based on the detected voltage. The complete AT-6010 kit features test leads and accessories International accessory kit for use outside North America.
The AT-6010/KIT also includes The Amprobe AM-530 True-rms Electrical Contractor Multimeter. The AM530 is the fully-featured multimeter of choice for the professional electrical contractor. Measure and verify presence of voltage in order to connect equipment or to perform repairs, run new wiring, check continuity of electrical connections, identify blown fuses, troubleshoot motors or check transformers. The AM-530 features true-rms sensing to accurately measure voltage on systems affected by harmonics, a built in flashlight to detect wire colors in the dark, a "third hand" probe holder and VolTect™ non-contact voltage detection.
Included Components
1 - AT-6010-R Receiver
1 - AT-6010-T Transmitter
1 - AM-530 Multimeter
1 - CC-6010 Soft Carrying Case
1 - User Manual
1 - 1.5 V AA (Iec Lr6) Battery
1 - TL-6000-INTL test lead and accessory kit includes:
2 - 1 m test leads (red, black)
1 - 7 m test lead (green)
2 - Alligator clips (red, black)
2 - Outlet blade adapter (red, black)
2 - Outlet round adapter (red, black)
Terms & Conditions
Please note estimated delivery time above. Contact us for details or if you have a delivery requirement. We ask for your patience while striving to ensure your shipment arrives quickly and accurately.
Domestic Shipping
FREE Standard Shipping on items OVER and less than 30lbs to continental U.S. Add for AK, HI, or PR. Please contact us for shipping rates to any overseas US territories including: Northern Mariana Islands, Guam, Puerto Rico, U.S. Virgin Islands and American Samoa.
PO Boxes/APOs require USPS shipping and may therefore experience longer lead times
6.25% Sales Tax for shipping to MA
International Shipping
Due to international voltage requirements, please ask us prior to purchasing to confirm your product will operate correctly in your country.
Please contact us for shipping rates to any overseas U.S. territories.
International customers are responsible for all shipping charges, including any duties or taxes.