T12 OLED Digital Soldering Iron Station Temperature Controller Board for HAKKO T

Description

The controller board Words with English Display ,5 seconds fast tin, excellent workmanship, quality and stability, strong power, freely adjust the sleep time to 30 minutes, black brushed aluminum casing, black acrylic panels, beautiful appearance, large joints is no longer a problem
Working AC voltage: 100-240V
Temperature setting range: 150-480 degree, the actual temperature can be 500 degrees
Sleep Time 1-30 minutes freely adjust
SIZE:Length:60mm Wide:27mm
Special note: OLED soldering station on a new heater installed being given issue beeps, it does not matter two or three minutes like a new heater will have a process of adaptation, with the aged or used are not new heater temperature is within 5 degrees of beating is normal. After beating aging will be within 1 degree
Basic operation
1: Normal mode, the rotary encoder to adjust the temperature, slow turn, every 1 degree grid, fast forward 5 degrees per division.
2: Under normal mode,short-press the encoder to enter dormancy, any encoder operation quit ,if the vibration mode is enabled, then the vibration handle to exit Hibernation.
3: normal mode, double-click on the encoder to enter the enhanced mode, any action the encoder exits.
4: In sleep mode, press the Mid-button off, power on again or press the power button.
5: normal mode, press the encoder to enter the menu setting mode.
6: a long time without entering sleep mode, if not longer into shutdown mode, the two times can be set to enter the menu.
Detailed menu settings meanings:
1, the reference voltage, the system in mV. Corresponding to the control board TL431 voltage is consistent, it is recommended to keep the factory parameters.
2, the offset voltage. Corresponding to the control board op amp offset voltage, software correction value, the control board using the op amp offset is small, it is recommended to keep the factory parameters.
3, gain adjustment. Corresponding to the control board amplifier magnification, it is recommended to keep the factory parameters.
4, the temperature calibration. System for 350 degrees, the global temperature calibration. Other points based linear temperature correction after entering the temperature calibration, corresponding to a professional temperature measurement equipment, slow adjustment parameters until the temperature is 350 degrees for the actual measurement calibration is finished, press Exit.
5, the wakeup setting. 0 Do not allow wakeup, 1, vibrations at the handle and encoder operations can wake up the system to sleep. 2, allowing only wake up the system hibernation encoder.
6, sleep time. No action, the system automatically sleep time, in minutes.
7, the shutdown time. Sleep, no automatic shutdown wait time in minutes.
8, temperature strengthened. After entering the temperature set to strengthen, increase the temperature set value at the current temperature, in degrees Celsius.
9, strengthening time. After entering the temperature corresponding to strengthen, how long automatic withdrawal temperature enhanced mode. In seconds.
10, the alert setup. 1, allowing beep, 0, turn off the buzzer.
11, to restore the default. 1 to restore the default parameters, 0 no recovery parameters
Package includes:
1PCS T12 OLED Digital Soldering Iron Station Temperature Controller Board for HAKKO S
Payment
Payment
Payable To
Note
PayPal
Paypal
All payments are due within 7 days of the close of auction. Failing to do so, non-paying bidders will be reported to eBay.
Shipping Policy
Delivery Time
We ship to worldwide, it usually takes 10-30 Business Days to delivery.
Shipping address
We ship to your PayPal address. Please, make sure to provide us with correct, precise, and detailed shipping Address.
Send Time
Items will be shipped within 1 to 3 business days upon payment received or cleared.
Note
If you don't receive items over 30 business days, please notify us via eBay message.
Return Policy
We appreciate your business and offer an instant 7 days return policy.(7 days after receive the item). The returned item has to be in its original condition. We are able to refund your money without shipping cost.
Contact us
For anything about product, price, shipping or order status, please contact us via eBay message.
We love positive feedback and 5 scores DSR. We will leave it for everyone that leaves it for us.